and even though I’m tired, things are all right!

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      8
      arrow-down
      1
      ·
      1 year ago

      Weirdly, I’ve never had an issue with it. The dishwasher seems to get it clean every time. shrug

        • moosh@lemmy.worldOP
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          1 year ago

          Oooh. Haha, you gave me the ol lemmy switcharoo. I was saying that I put the mug in the dishwasher, not the aeropress! Aeropress gets rinsed and stored in it’s caddy/storage rack.

            • moosh@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              That’s what I was thinking as well. But no, they were thinking I washed the aeropress 2x a day in the dishwasher!

          • skomposzczet@vlemmy.net
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Ah, after reading whole thread again it makes perfect sense. I was fixated on washing aeropress because I quite recently had a debate with my family about alternative coffee brewing methods and how easy it is to clean after them. That’s why I thought it was about aeropress, not the mug haha. Sorry for the confusion.

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      arrow-down
      6
      ·
      1 year ago

      Weirdly, I’ve never had an issue with it. The dishwasher seems to get it clean every time. shrug

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      arrow-down
      7
      ·
      1 year ago

      Weirdly, I’ve never had an issue with it. The dishwasher seems to get it clean every time. shrug

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      0
      arrow-down
      6
      ·
      1 year ago

      Weirdly, I’ve never had an issue with it. The dishwasher seems to get it clean every time. shrug

  • valaramech@kbin.social
    link
    fedilink
    arrow-up
    13
    arrow-down
    2
    ·
    edit-2
    1 year ago

    Pro tip: Don’t consume caffeine within about 1 hour of waking up. Waiting a bit gives your body time to clean up the sleep chemicals and get started on the being awake chemicals before you start adding to the mix.

    There are a lot of articles about this out there (here’s one), but they all say more or less the same thing, as far as I’ve been able to tell.

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Oh, interesting! I’m very, very guilty of doing the opposite of that. Making coffee is always the first activity of the day for me.

      • wavebeam@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Sorry I’m bumping a nearly month-old thread here, but big same. Making coffee for myself and my wife in the morning is one of the most enjoyable parts of my morning routine. I guess I should consider when I actually “wake up” and when I start consuming the coffee, but it’s almost certainly less than an hour most days.

    • oatmilkmaid@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Love mine. Especially for cleanup and time it takes to brew. Very happy with it. I have a French Press and a ceramic filter I use once in a while, but if it’s just me the aero press wins over.

      • lessthanthree@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Same reasons why I ditched my French Press. Moka Pot can be messy and seems like a more involved process. Aeropress is such an easier and cleaner process.

        • Hamartiogonic@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Making a batch of coffee with the moka pot is really easy, but making good coffee is really tricky though. You have to know exactly what you’re doing or you’ll get mediocre or even bad coffee out of it .

          The aeropress is a very easy, forgiving and robust method, and messing it up would require some extraordinary conditions. Making small mistakes here and there won’t be a big deal.

    • ClassyDave@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Honestly I love mine, it’s cheap, easy, and there are many variations of the brewing method you can use to suit your tastes.

      Only downside is that it makes ones cup at a time if that matters to you.

      • burble@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Only downside is that it makes ones cup at a time if that matters to you.

        I mean, you can make 4 cups at a time if you use the OG instructions instead of the French press type methods.

    • ceeg@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      i love mine but i want to ditch pressure+heat in plastic. wondering if moka is the way to go, but really just wish they made aeropress with other materials!

      • Hamartiogonic@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        What’s the problem with pressure+heat? In these kinds or pressures and temperatures, the plastic appears to be strong enough to handle it well enough.

        • ceeg@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          it’s strong enough to, but i don’t trust plastic not to leach out nasties into my coffee in those conditions, plus it seems to retain grossness :(

              • Hamartiogonic@sopuli.xyz
                link
                fedilink
                English
                arrow-up
                2
                ·
                edit-2
                1 year ago

                Seems to me that the results are inconclusive at the moment, which only means that the potential effect can’t be noticed as easily as the effects of asbestos, DDT, smoking or radiation. That doesn’t mean that the effect isn’t there. It may well exist, but it certainly isn’t very strong, because otherwise we would have noticed it already and the debate would have been over decades ago. But since we can’t rule it out at this point, I really don’t blame anyone from being a bit cautious.

                As a side note, you would get lots of clicks for your article if you were say that “we’re all going to die because of plastic”, but it wouldn’t be a very defendable position. Fortunately for the author, there is a way to make the reader think that without explicitly saying anything like it. By using clever words like “likely”, “associated”, “possibly”, “may be”, “in vitro”, “could disrupt”, “linked to”, “animal studies” etc. you can sort of say things without actually saying anything. You can also make the reader feel informed without actually conveying much information at all.

                • ceeg@lemmy.world
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  1 year ago

                  I agree about the soft language they use and plastics are a BROAD category of materials… but yeah, I like to be cautious around exposing them to heat and using them for long term liquid storage.

          • eramseth@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            For what its worth, I think aeropress uses plastic that’s less bad, if that’s possible (I believe this consideration went into the design).

            Still, I’m with you on this. It’s really hard to get away from plastic though. Even in relatively high end drip machines, the internals of most espresso makers, etc.

            • ceeg@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              i super agree, french press or moka is my target, i just miss the flavor the pressure creates. i’ll figure it out one day!

              i think the tritan plastic they’re using in the new models will be interesting, def seems less porous and likely to hang onto bad flavors x_x

              • eramseth@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Yeah… you can always just… clean it… unflavored denture / retainer/ mouth guard cleaning tablets or … actual coffee cleaning solution (also available in tablet form) should remove most or all of funk…

      • moosh@lemmy.worldOP
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        There’s going to be a glass one released, if it hasn’t already come out yet.

      • moosh@lemmy.worldOP
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        There’s going to be a glass one released, if it hasn’t already come out yet.

    • IncidentalIncidence@feddit.de
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      1 year ago

      would recommend it to everyone. I don’t use it every day, but there are a million and one ways to brew with it, it’s very handy for traveling, it’s super easy.

      I use it particularly for when I’m at the end of a bag of coffee and don’t have enough left to do a French Press or a pour-over – I have a couple of Aeropress recipes that use 10-12 grams.

  • Ilmi@lemmy.my.id
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    Have you tried inverted method? It allows you to steep longer, thus extract more coffee.

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      I have! although I prefer the plunger/suction method. 95% of the water stays in and I don’t have to bother with flipping it!

    • Hamartiogonic@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I have tried that too, but never really saw the value in that, although that could be because my lack in tasting skills.

      I’m grinding fairly fine (1.1 in the Aergrind), which seems to clog up the paper filter to such an extent that dripping is very slow. I also stir a lot to make extraction a bit faster, so I would say that I haven’t had trouble with extracting enough in the upright configuration.

      • Ilmi@lemmy.my.id
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I usually grind a little bit coarse, hence using the conventional method will drain my water fast. That’s why inverted is a suitable method for me.

        But, if you prefer finer ground, then I suggest conventional upright method.

        That’s the beauty of Aeropress, you can modify your brewing method to suits your needs.

  • tehgersh@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    What an nifty cup!

    I might do the same, the drip coffee I make (primarily for my wife who prefers quantity over quality) does not scratch the itch like the aeropress does.

        • moosh@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Yea, that’s where I’m at too. Can’t really go back. I’m always sad with the coffee they have available for us at the office.

          • tehgersh@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            I have a second brewing setup at work for just that reason. The cheapest part, ironically, is the Aeropress. The Aergrind is so good I got a second one so I don’t have to worry about bringing it home in the weekends.

            • moosh@lemmy.worldOP
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              Well now I’m intrigued, what’s the benefit of using an aergrind over an electric burr grinder?

              • tehgersh@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                1 year ago

                The Aergrind gets you step-less adjustment. I’m not familiar with an electric grinder that offers that at anywhere near the same price point. It’s also very capable of espresso grinds. I have a Solis Barista Perfetta Plus espresso machine, and I can very easily dial in the grind setting for a specific bean/roast and pull some really tasty shots.

  • NocturnalNebula@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    How often do you use your aero? I have one but I pretty much stopped using it once I got my v60. Does it have any advantages in brew or anything?

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Multiple times a day! I like it because it’s quick to brew, makes a clean, tasty cup of coffee, and very little to clean up when I’m done. Haven’t really looked into a Hario or pour over too much but I’ve been fairly happy with my aeropress. IMO it’s like a French press and gives a nice full-body brew but without the oil or fines in the bottom of the cup.

      • sqw@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        V60 is easier cleanup and even cleaner brew but a total rabbit hole of fiddlyness

        • moosh@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          easier cleanup than an aero press?! I didn’t think it could get easier! The one thing stopping me from getting into harios now is the fact that I just got a fellow kettle but I opted for the non-gooseneck model. No way I’m getting a second one to make the switch to pour overs. I’ll just have to be content with my Corvo.

      • moosh@lemmy.worldOP
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I think it makes a more refined cup of coffee. There’s less oils and fines don’t get into the mug.

  • stillnotahero@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Wow this is so cool, I had an Aero Press way back in my college days. Didn’t know they were still in existence / popular. Best cups of coffee I’ve ever had.

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Yeah, they’re still around! They only came out in 2008 I think? Anyway, there’s a world championship of aero press every year too. It’s kinda cool if ya ask me!

  • kitonthenet@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Thanks op, this motivated me to finally get off my butt and clean my aeropress. With leftover donuts too :)

  • vercimusart@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I exclusively use the Aeropress and make cups of coffee on demand. Trick is to get a couple of good metal mesh filters so you’re not using an endless supply of paper filters. 197 degree water, 20 seconds of bloom, 40 seconds of brewing and bam, makes amazing coffee.