Thanks to Smart Home Junkie’s video (invidious link), I had my Atom Echos as voice recognition boxes with all audio output redirected to a media player of my choice (because the audio on the Echo is super quiet).
Whenever ESPHome updated, I updated my Echos to get the recent ESPHome updates, and then reinstalled the custom yaml for audio redirection.
However, with ESPHome’s recent 2024.6.4 update, trying to install the yaml triggers errors that don’t seem to make sense. For example, here’s a section of the yaml:
microphone:
- platform: i2s_audio
id: echo_microphone_kitchen
i2s_din_pin: GPIO23
adc_type: external
pdm: true
speaker:
- platform: i2s_audio
id: echo_speaker_kitchen
i2s_dout_pin: GPIO21
dac_type: external
mode: mono
voice_assistant:
id: va
microphone: echo_microphone_kitchen
speaker: echo_speaker_kitchen
noise_suppression_level: 2
auto_gain: 31dBFS
volume_multiplier: 2.0
vad_threshold: 3
on_listening:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
effect: "Slow Pulse"
on_stt_vad_end:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
effect: "Fast Pulse"
on_tts_start:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
brightness: 100%
effect: none
on_tts_end:
- homeassistant.service:
service: media_player.play_media
data:
entity_id: media_player.${media_player}
media_content_id: !lambda 'return x;'
media_content_type: music
announce: "false"
on_end:
- delay: 100ms
- wait_until:
not:
speaker.is_playing:
- script.execute: reset_led
on_error:
- light.turn_on:
id: led
red: 100%
green: 0%
blue: 0%
brightness: 100%
effect: none
- delay: 1s
- script.execute: reset_led
on_client_connected:
- if:
condition:
switch.is_on: use_wake_word
then:
- voice_assistant.start_continuous:
- script.execute: reset_led
on_client_disconnected:
- if:
condition:
switch.is_on: use_wake_word
then:
- voice_assistant.stop:
- light.turn_off: led
external_components:
- source: github://pr#5230
components:
- esp_adf
refresh: 0s
esp_adf:
On lines 3 and 10 I define unique IDs for the device’s microphone and speaker.
But ESPHome won’t compile, telling me:
- on line 46: Too many candidates found for ‘id’ type ‘speaker::Speaker’ Some are ‘echo_speaker’, ‘echo_speaker_kitchen’.
- on line 57: Too many candidates found for ‘id’ type ‘speaker::Speaker’ Some are ‘echo_speaker’, ‘echo_speaker_kitchen’.
- on line 77: Too many candidates found for ‘id’ type ‘microphone::Microphone’ Some are ‘echo_microphone’, ‘echo_microphone_kitchen’.
- on line 90: Too many candidates found for ‘id’ type ‘speaker::Speaker’ Some are ‘echo_speaker’, ‘echo_speaker_kitchen’.
There are no other occurrences of the word “speaker” or “microphone” in the conf yaml (and I’m not including other yaml files).
I’m assuming most of this config is default, and the only things I care about are forcing pin 21 for the speaker (line 11) and redirecting audio to my media player (lines 45-52).
Sorry, I misunderstood what you are trying to do here. I thought you were trying to use the Atom Echo itself as a media player. Disregard that arduino library comment, it isn’t relevant. I just watched the video since I couldn’t earlier.
Indeed what you are doing should work. Are you certain that the upload was successful? With GPIO21 set as the speaker output, the speaker data should absolutely not work. The fact that it does means that somewhere along the line, the GPIO22 is set as the speaker output.
FYI, here’s the config yaml I’m copy-pasting for all my Echos. The only thing that changes are in the “substitutions” section:
substitutions: name: m5stack-echo-kitchen friendly_name: M5Stack Atom Echo - Kitchen media_player: kitchen_speaker encryption_key: !secret kitchen_encryption_key speaker_i2s_dout_pin: "GPIO21" esphome: name: ${name} name_add_mac_suffix: false friendly_name: ${friendly_name} project: name: m5stack.atom-echo-voice-assistant version: "1.0" min_version: 2024.6.0 esp32: board: m5stack-atom framework: type: esp-idf api: encryption: key: ${encryption_key} ota: - platform: esphome id: ota_esphome dashboard_import: package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main wifi: ssid: !secret wifi_ssid password: !secret wifi_password on_connect: - delay: 5s # Gives time for improv results to be transmitted - ble.disable: on_disconnect: - ble.enable: ap: improv_serial: esp32_improv: authorizer: none button: - platform: factory_reset id: factory_reset_btn name: Factory reset i2s_audio: - id: i2s_audio_bus i2s_lrclk_pin: GPIO33 i2s_bclk_pin: GPIO19 microphone: - platform: i2s_audio id: echo_microphone i2s_din_pin: GPIO23 adc_type: external pdm: true speaker: - platform: i2s_audio id: echo_speaker i2s_dout_pin: ${speaker_i2s_dout_pin} dac_type: external mode: mono voice_assistant: id: va microphone: echo_microphone speaker: echo_speaker noise_suppression_level: 2 auto_gain: 31dBFS volume_multiplier: 2.0 on_listening: - light.turn_on: id: led blue: 100% red: 0% green: 0% effect: "Slow Pulse" on_stt_vad_end: - light.turn_on: id: led blue: 100% red: 0% green: 0% effect: "Fast Pulse" on_tts_start: - light.turn_on: id: led blue: 100% red: 0% green: 0% brightness: 100% effect: none on_tts_end: - homeassistant.service: service: media_player.play_media data: entity_id: media_player.${media_player} media_content_id: !lambda 'return x;' media_content_type: music announce: "false" on_end: - delay: 100ms - wait_until: not: speaker.is_playing: - script.execute: reset_led on_error: - light.turn_on: id: led red: 100% green: 0% blue: 0% brightness: 100% effect: none - delay: 1s - script.execute: reset_led on_client_connected: - if: condition: switch.is_on: use_wake_word then: - voice_assistant.start_continuous: - script.execute: reset_led on_client_disconnected: - if: condition: switch.is_on: use_wake_word then: - voice_assistant.stop: - light.turn_off: led on_timer_finished: - voice_assistant.stop: - switch.turn_on: timer_ringing - wait_until: not: microphone.is_capturing: - light.turn_on: id: led red: 0% green: 100% blue: 0% brightness: 100% effect: "Fast Pulse" - while: condition: switch.is_on: timer_ringing then: - lambda: id(echo_speaker).play(id(timer_finished_wave_file), sizeof(id(timer_finished_wave_file))); - delay: 1s - wait_until: not: speaker.is_playing: - light.turn_off: led - switch.turn_off: timer_ringing - if: condition: switch.is_on: use_wake_word then: - voice_assistant.start_continuous: - script.execute: reset_led binary_sensor: - platform: gpio pin: number: GPIO39 inverted: true name: Button disabled_by_default: true entity_category: diagnostic id: echo_button on_multi_click: - timing: - ON for at least 50ms - OFF for at least 50ms then: - if: condition: switch.is_on: timer_ringing then: - switch.turn_off: timer_ringing else: - if: condition: switch.is_off: use_wake_word then: - if: condition: voice_assistant.is_running then: - voice_assistant.stop: - script.execute: reset_led else: - voice_assistant.start: else: - voice_assistant.stop - delay: 1s - script.execute: reset_led - script.wait: reset_led - voice_assistant.start_continuous: - timing: - ON for at least 10s then: - button.press: factory_reset_btn light: - platform: esp32_rmt_led_strip id: led name: None disabled_by_default: true entity_category: config pin: GPIO27 default_transition_length: 0s chipset: SK6812 num_leds: 1 rgb_order: grb rmt_channel: 0 effects: - pulse: name: "Slow Pulse" transition_length: 250ms update_interval: 250ms min_brightness: 50% max_brightness: 100% - pulse: name: "Fast Pulse" transition_length: 100ms update_interval: 100ms min_brightness: 50% max_brightness: 100% script: - id: reset_led then: - if: condition: - switch.is_on: use_wake_word - switch.is_on: use_listen_light then: - light.turn_on: id: led red: 100% green: 89% blue: 71% brightness: 60% effect: none else: - light.turn_off: led switch: - platform: template name: Use wake word id: use_wake_word optimistic: true restore_mode: RESTORE_DEFAULT_ON entity_category: config on_turn_on: - lambda: id(va).set_use_wake_word(true); - if: condition: not: - voice_assistant.is_running then: - voice_assistant.start_continuous - script.execute: reset_led on_turn_off: - voice_assistant.stop - lambda: id(va).set_use_wake_word(false); - script.execute: reset_led - platform: template name: Use listen light id: use_listen_light optimistic: true restore_mode: RESTORE_DEFAULT_ON entity_category: config on_turn_on: - script.execute: reset_led on_turn_off: - script.execute: reset_led - platform: template id: timer_ringing optimistic: true internal: true restore_mode: ALWAYS_OFF on_turn_on: - delay: 15min - switch.turn_off: timer_ringing external_components: - source: github://pr#5230 components: refresh: 0s - source: github://jesserockz/esphome-components components: [file] refresh: 0s file: - id: timer_finished_wave_file file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav logger:(sorry about my delayed response, @JustEnoughDucks@feddit.nl )
I’m sure that the install is successful because there are no errors during/after install, the Echo recognizes speech and interacts with Home Assistant, and when I change something in the yaml (e.g., which media player to pipe the audio to) the change takes effect.
Here’s something weird: I believe the default pin for “speaker” should be GPIO22, and when I switch it to GPIO21 it should not work. This works on some of my Echos, but not all of them!
Also weird: I think the standard pinout is:
Though I don’t know what these mean, I tried setting “speaker” to GPIO18 - which apparently isn’t used- and still the audio comes out of the Echo speaker! But again, only on some of my Echos.
I’d think that maybe some of these Echos are ignoring the GPIO setting for “speaker” and using a default, but these Echos used to work! (that is, they used to not play audio out of the Echo speaker when “speaker” was GPIO21). And so I want to think that maybe the ESPHome upgrade made them stop working, but all my Echos have the same upgrade and yet still some of them work.
Is there a way to config the Echo speaker to have zero volume? If so, I could just set that and then who cares if the audio is piped to it.
Well, I wasn’t able to figure this out and was just living with duplicate audio coming from the echo and the media player mostly simultaneously. But today I upgraded ESPHome from 2024.6.6 to 2024.7.0 and the problem is gone. Sheesh! :)