Incandescent light bulbs are officially banned in the U.S.::America’s ban on incandescent light bulbs, 16 years in the making, is finally a reality. Well, mostly.

  • Shogun@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Any recommendations? I’ve struggle with LED light color temp off and on over the years. I haven’t looked into it in a while though. It always seems like if you want a low color temp it has to be an edison bulb which is really dim.

    On a separate note I’ve also had reliability issues with LED bulbs where they will blow out and emit smoke.

    • TheMightyCanuck@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      10
      ·
      1 year ago

      Look for colour names like “soft white” or “warm”. The 2700K is a dead give away for the colour you’re looking for.

      Also, separate note: check your appliances or fixtures for power spikes. cheaper LEDs are notoriously sensitive to voltage fluctuations

      • tev
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        how would you check for that exactly?

        • TheMightyCanuck@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          Look closely at packaging. If you’re in North America, Phillips is the most common for bulbs. They have packages marked 2700K, 5000K, and 6500K.

          The colours are as follows: 2700- soft white (yellow hue), 5000- bright white (white hue, almost no colour), and 6500- day light (blue-ish hue, similar to fluorescent).

          If you end up not being able to distinguish… ask an employee and they should be able to help

          • tev
            link
            fedilink
            English
            arrow-up
            4
            ·
            1 year ago

            i meant checking for power spikes lol

            • TheMightyCanuck@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              3
              ·
              edit-2
              1 year ago

              Lol im dumb… forgot it was a 2 pt question.

              Cheap way is to buy a surge protector/ power strip with surge protector.

              Plug in appliances/lights that burn out faster than others. Periodically check surge protector to see if the internal breaker has been tripped.

              Fancy way is to buy a multimeter and monitor voltage when large appliances turn on/off. That’s usually the most likely culprit for voltage spikes (as your home grid has to compensate for sudden increase in usage, which in turn causes voltage to fluctuate slightly)