Anyone with an iPhone 15 series device find their USB-C port to be loose? When I have it plugged in the car for CarPlay my cable frequently pops out if I nudge it accidentally. I’ve tried different brands of cables, and all of them wiggle loose eventually.

For context I’m using an iPhone 15 Pro.

  • fourish@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    9 hours ago

    Mine wouldn’t seat fully and would pop out. Debris in connector. Cleaned out with a needle and it was fine again. Go by the USB C connector seating fully. If it doesn’t, there’s something in there impeding it.

    • teft@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      4 hours ago

      I would suggest a toothpick next time. If you short out the right pins with a needle you can damage your phone.

      • B0rax@feddit.org
        link
        fedilink
        arrow-up
        2
        ·
        3 hours ago

        Don’t worry about it too much. As long as you don’t physically damage the pins, there is no problem. They are protected against electrical shorts.

  • MrJameGumb@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    20 hours ago

    I don’t have a 15, but the last time I had an issue with a charging cable just popping out like that it was because some debris was lodged way down in the very bottom of the port. It was a tiny little thing I had to use a needle and flashlight to get out but it was enough that the cable wouldn’t stay plugged in at all anymore

    • veee@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      20 hours ago

      I inspected the port before posting to rule it out. Clean as a whistle!

  • veee@lemmy.caOP
    link
    fedilink
    English
    arrow-up
    8
    ·
    20 hours ago

    As much as I am glad that we transitioned from lightning to USB-C, port durability was never an issue.

  • Veedem@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    18 hours ago

    I have the same issue. Brought it in and they cleaned the heck out of it. It’s better feeling though not perfect. I’ll bring it in under warranty another time because they said the process to replace the port takes like two hours and I didn’t have that time when I went in.

    • veee@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      13 hours ago

      Two hours? Geeze. Can’t imagine how I’d kill time at the mall for that long, but I’d still do it.

  • TheFeatureCreature@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    2
    ·
    20 hours ago

    I have a 14 pro and thus still use Lightning, but I’ve had iffy USB-C connectors and plugs on various other devices. Potentially an upopular opinion, but I don’t like USB-C much and find it doesn’t have a very positive feeling connection. I’ve also had a couple USB-C plugs fail already.

      • reddig33@lemmy.world
        link
        fedilink
        arrow-up
        2
        arrow-down
        2
        ·
        19 hours ago

        That’s why lightning cables were designed the way they were. The flat connector was made to break if there was too much strain so that the port wouldn’t come loose. The cable is more easily/cheaply replaceable than the port.

        • gray
          link
          fedilink
          arrow-up
          5
          arrow-down
          3
          ·
          18 hours ago

          Lightning cables are actually backwards to what is desired:

          In USB standards the part that wears out (the spring pins) are on the cable, and thus easily replaced. In lightning the wear piece is in the expensive device, the cable has no moving parts. Beyond that, lightning has exposed pins, kind of a bad idea.

          Definitely better than micro B, but far inferior to USB C.

          • B0rax@feddit.org
            link
            fedilink
            arrow-up
            1
            ·
            3 hours ago

            That is simply incorrect. In lightning the wearing part also was on the cable. Simply by it being a softer metal.

    • Zorsith@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      19 hours ago

      It’s why usb-A will probably never go away for computers; the friction fit is fantastic, and you don’t have to frequently clean it out to have a connection.

  • reddig33@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    19 hours ago

    Consider getting a wireless CarPlay adapter as a work around. “Carlinkit” seems to be the go to brand for this.

    • veee@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 hours ago

      That’s actually not a bad idea. Thanks for the recommendation.

  • thisisdee@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    2
    ·
    19 hours ago

    I have a 15 Pro as well and mine is still ok. Although I rarely use the port because I use wireless charging most of the time.

    I did have an issue with CarPlay disconnecting sometimes, even though the cable itself doesn’t pop out. But it also happens on my husband’s Pixel, and we’ve tried other cables, so we think it’s just the car’s connection rather than the cable/phone.

    • veee@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 hours ago

      That’s a fair assessment. Now’s a good time to experiment with cables since it’s Black Friday.