Having already configured a VLC-powered Google TV configuration with USB hard drives for a relative without the router or download speed needed for reliable streaming, I’m now trying to configure a similar setup for another relative with a non-smart TV and an even slower download speed.

The only requirements for such a device would be the ability to be controlled entirely with a remote, a USB-A or USB-C port compatible with USB hubs and media storage devices, and the reliable playback of videos of assorted codecs and file extensions. As Roku, FireTV, and Android/Google TV streaming sticks tend to be plastered with ads as a means of promoting content within their ecosystems, an alternative HDMI device that minimizes the number of button presses between turning on the TV and and reaching the navigation menu for videos on attached USB storage devices would be preferred.

  • seaQueue@lemmy.world
    link
    fedilink
    English
    arrow-up
    14
    ·
    edit-2
    1 year ago

    Plug your laptop into it and use VLC. That’s the simplest approach.

    If you want a dedicated playback system any little arm SBC that has decent hardware accelerated video playback should work well. Something like an RPi 4 can run a basic desktop with hardware accelerated VLC, or you could run libreelec. Look for something modern that supports the encodings you think you might use, it’s a drag dealing with choppy playback because you’re trying to play an encoding the board doesn’t support.

    Or you could run a media server like PLEX somewhere on your network and use a Chromecast plugged into the TV as a streaming target. This lets you use your phone as a control device. The simplest setup for this is to just run PLEX on your desktop or laptop and shut the server down when you’re not actively using it.

      • seaQueue@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        I’m not using a dedicated PLEX server, just running it on a machine that’s not always on.

        I was trying to make the point that you don’t need a dedicated PLEX server, you can just fire it up on a laptop when you’re going to use the TV.

  • InvisibleShoe@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    1 year ago

    I use an Odroid loaded up with CoreElec ( a version of Kodi ).

    • It connects via HDMI
    • can be controlled with a normal remote control via HDMI-CEC
    • can connect 4 USB devices (including a USB hub)
    • no need for a constant internet connection
    • Tv and movie database info is downloaded once and stored, not retrieved as needed
    • Has played every file format I’ve thrown at it
    • Easy to use interface
    • FOSS and no ads
  • erusuoyera@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I have a Roku (apart from a static ad on the home screen, I haven’t noticed any problem with them and if it was really an issue I could use adblocking DNS servers), and can play media on it from a NAS drive, or I can plug a USB drive into my router and access it that way. It’s all controllable via the remote and provided there’s good WiFi signal, doesn’t require a fast internet connection. Saying all that, I do have fast internet and usually just stream stuff to it via my phone/tablet and the video caster app.

    • Zedstrian@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I can imagine the phone-to-roku streaming method working well, particularly given the simplicity of Roku OS, though in terms of USB drive usage, past testing on a dedicated Roku TV has been mixed in terms of codec compatibility, unfortunately.

  • Aggravationstation@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I’d recommend a Raspberry pi running Libreelec. Its Kodi so has a great UI with no ads or tracking, supports HDMI-CEC so you can control it with your TV’s own remote (on most models) and I haven’t found a video codec it can’t handle. Also if you decide to move to a NAS or streaming for your videos in the future it supports that as well.

    Any model of pi should be able to handle video playback from USB but older ones obviously can’t handle 4k. Also a pi can’t power a mechanical USB drive so if that’s what you’re using you’d either need them to have their own power supply or use a powered USB hub.

    One like this could be used to power the pi and drives at the same time: https://www.amazon.co.uk/Anker-PowerIQ-Charging-Macbook-Surface-7-Ports-3/dp/B00VE4UJD4/ref=mp_s_a_1_1?crid=2SJ87KGXVYOFK&keywords=anker+usb+hub+powered+3.0&qid=1696764826&sprefix=anker+usb+hub+powered+3.0%2Caps%2C884&sr=8-1

  • Disonantezko@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago
    • My firestick (4k) has Android, with correct accessory (that allows power and OTG at the same time).
    • You can connect to USB drive or hub.
    • Has remote control.
    • There are alternative launchers to avoid ads.
    • You can sideload most things.
    • Zedstrian@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Good point; something I’ll have to try before I decide on buying anything. Problem with some media players could be the lack of support for changing between audio and subtitle tracks on the fly for multilingual support, so in both the case of the TV itself and anything I plan on buying I’ll have to do more research first I guess, since unfortunately Amazon listings are often bereft of non surface-level technical specs.

      • Gooey0210@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        In any case you can just buy a raspberry pi, or even better a lenovo thinkcentre, or anything. I just wanted to let you know that many TVs support it, though it’s a little bit of pain

      • Gooey0210@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        In any case you can just buy a raspberry pi, or even better a lenovo thinkcentre, or anything. I just wanted to let you know that many TVs support it, though it’s a little bit of pain

  • just_another_person@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Nvidia Shield is pretty paired down if you want something plug and play.

    There are some NAS products out there with media servers and HDMI output. Helps you skip a few steps.

  • Pixelologist@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I recommend looking into playnite as a “launcher” for your games.

    If you have a PC you could also consider moonlight streaming

    • Forklift Certified@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      +1 on that.

      But…by the time you put together the bill of quantities for the Pi, Case, Power brick, Active cooling, remote… The 1080p Firestick becomes cheaper. The Firesticks advert filled UI can be wrangled using a custom launcher.

      • SpaghettiYeti@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Yeah, true. I got my 4 a couple of weeks ago and all the bits and pieces came to about $100 from Amazon with some sales.

      • Zedstrian@lemmy.dbzer0.comOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Definitely true; while it would have been more fun setting up something like a Pi4 with Plasma Bigscreen to avoid content ecosystems, it seems that choosing between a Google TV or Fire TV stick or a USB-supporting BluRay player will be a more economical option. Haven’t delved much into custom launchers before, but it seems that might be a good solution for the sort of minimalistic UI I’m looking for.

    • lud@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      If you are gonna stream anyway I recommend a Plex/Jellyfin server.

      Steam link or VLC is probably gonna be annoying to use and poor quality wise.

      If OP actually wants a very simple way of playing a film from an actual USB drive, I would use a PI with VLC.

      • SpaghettiYeti@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Eh. I can stream 4k 60fps games through Steamlink and have used it for movies too. It works perfectly.

        Plus, you get a computer out of it too and can game.

  • Uluganda@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I dont know if these devices are available worldwide, but we, Indonesian, have 2 cheap devices exactly for that. ZTE B860H V5 and HG680FJ. It’s like $10 without remote, and another $1 for the remote.

    It came locked by one of our ISP, but you can easily unlock it and put anything you want in it. Linux, OpenWRT, or just regular Android TV. ROM choices are limitless.

  • stifle867@programming.dev
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    3
    ·
    1 year ago

    The “simplest” method is to plug the USB straight into the TV if the TV supports USB playback. You could also try plugging the USB into the router as many of them support DLNA servers - not a solution but a piece of the puzzle that can be used.