• ciko22i3@sopuli.xyz
    link
    fedilink
    arrow-up
    33
    ·
    1 year ago

    You could use it if you had another one with a female headphone jack. You could play your music to a speaker in another room if you have Ethernet in both rooms. Copper is copper.

    • EatSleepBatheRepeat@sh.itjust.works
      link
      fedilink
      arrow-up
      17
      ·
      1 year ago

      I’ve done this. I’ve made speaker wire to ethernet adaptors to connect speakers in a different room through the walls to an amp. Feels and probably is so wrong.

      • Ilovethebomb@lemm.ee
        link
        fedilink
        arrow-up
        9
        arrow-down
        1
        ·
        1 year ago

        It really depends how much power you put through the cable, ethernet is something like 0.2 mm2 per core. You’d definitely want to double up cores.

    • Inductor@feddit.de
      link
      fedilink
      arrow-up
      12
      ·
      1 year ago

      While, as you said, both wires will conduct electricity just fine, they will have different AC impedance.

      I would guess this wouldn’t make much of a difference if you go Audio->Ethernet->Audio, since sound is at fairly low frequencies. But Ethernet->Audio->Ethernet might have problems with really high data rates, like GiB/s.

    • sethboy66@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Hell, 10/100base-t only uses four wires so you could run internet through a 4-pole 3.5; though YMMV depending on the particular 3.5mm’s specs. I don’t know if drivers would be a problem, but perhaps a 4-pole 3.5 to USB would be handy.

      Easy AliExpress purchase