The Picard Maneuver@lemmy.worldM to Lemmy Shitpost@lemmy.world · 8 months agoWhoopslemmy.worldimagemessage-square100fedilinkarrow-up11.23Karrow-down111cross-posted to: the_pack@lemmy.world
arrow-up11.22Karrow-down1imageWhoopslemmy.worldThe Picard Maneuver@lemmy.worldM to Lemmy Shitpost@lemmy.world · 8 months agomessage-square100fedilinkcross-posted to: the_pack@lemmy.world
minus-squareToes♀@ani.sociallinkfedilinkarrow-up12·8 months agoHere’s a tip for anyone with this problem. Take an elastic band and place it over the devastated screw and try again.
minus-squareJCreazy@midwest.sociallinkfedilinkEnglisharrow-up19·8 months agoI’ve tried this hundreds of times and it’s never worked.
minus-squareAnUnusualRelic@lemmy.worldlinkfedilinkEnglisharrow-up33·8 months agoOf course not. But it’s funny to watch you try.
minus-square🇸🇵🇪🇨🇺🇱🇦🇹🇪🇷@lemmy.worldlinkfedilinkarrow-up7·8 months agoI posted it above, but the best way is to Dremel with a metal cutting blade to convert it to a flat head. Source: I used to work for Home Depot and had to fix shit for people all the time.
minus-squareRiverGhost@slrpnk.netlinkfedilinkarrow-up5·8 months agoI was very confused until I realized you mean flat elastic bands which I’m not so familiar with (the ones I’m used to, have square cross sections).
minus-squarequicksand@lemm.eelinkfedilinkarrow-up3·8 months agoLatex gloves also work alright in a pinch
minus-squareMaalus@lemmy.worldlinkfedilinkarrow-up8·8 months agoNeither of those really work when the screw is hard to remove, and quite often those which you strip are hard to remove. If you put the same damaged fastener back on and then can’t remove it, that’s on you though.
minus-squarequicksand@lemm.eelinkfedilinkarrow-up1·8 months agoYeah definitely never put a stripped screw back in. Replace it or just leave it empty
minus-squareBytemeister@lemmy.worldlinkfedilinkΕλληνικάarrow-up1·edit-28 months agoJust like my lug nuts. Amazing how far you can go with just two.
Here’s a tip for anyone with this problem. Take an elastic band and place it over the devastated screw and try again.
I’ve tried this hundreds of times and it’s never worked.
Of course not. But it’s funny to watch you try.
I posted it above, but the best way is to Dremel with a metal cutting blade to convert it to a flat head.
Source: I used to work for Home Depot and had to fix shit for people all the time.
I was very confused until I realized you mean flat elastic bands which I’m not so familiar with (the ones I’m used to, have square cross sections).
Latex gloves also work alright in a pinch
Neither of those really work when the screw is hard to remove, and quite often those which you strip are hard to remove. If you put the same damaged fastener back on and then can’t remove it, that’s on you though.
Yeah definitely never put a stripped screw back in. Replace it or just leave it empty
Just like my lug nuts.
Amazing how far you can go with just two.