I have got a question for all the #tech people out there with experience regarding #hp and #Linux
#Windows11 is being rolled out and I probably will have to set up my Laptop again. Never used #Linux on a PC, so how about:
Do #Linux distributions support HP omen 17 (2019) ?
If so, which one would you recommend for chiefly MS Office use (64-bit Excel a must) ?
How difficult is a set-up for a non-IT pro who has always worked with Windows (but installed systems)?
@amunizp @Linux4Everyone @linux
Too bad, as I was thinking, #BIOS errors with the #Ubuntu #Linux #bootstick.
Any 💡 ideas which settings would need to be changed?
@HistoPol
https://www.infofuge.com/hp-omen-17-ubuntu/
Not an HP owner or user. So Googled, and it seems the process is straightforward.
#linuxmint builds on #ubuntu, and is a leading install and forget distribution which is also a good starting point for newcomers.
That said, not clear on how you got the BIOS errors. Could you walkthrough to it please?
@amunizp @Linux4Everyone @linux
@vipaal
Not sure if I understood everything. I created the USB bootstick with the latest 5yr “warranty” versión.
Then, I reebooted and selected the 1st option: start or install.
I then selected boot from USB.
Then I got the BIOS Error screen for some second.
After that, the yellow screen from the UEL below, but with white instead of green.
Note: I’ve never seen a working #Linux desktop.
@amunizp @Linux4Everyone @linux
@HistoPol
Ubuntu is asking to enable sgx, which can be done as explained in the answers here https://askubuntu.com/questions/1406760/sgx-disabled-by-bios-in-ubuntu-22-04
Enter BIOS, go to security section, set the Intel software guard extension option to enabled – from the top voted answer
The accepted answer explains a workaround. The catch being that watching 4K Blu-ray will be impossible.
@amunizp @Linux4Everyone @linux
@vipaal
(1/2)
Sooo…,
I have succeeded in using your "SGX to “enable” pretty quickly.
Still, same errors and the yellow UBUNTU.
I then saw that there is another boot option with “safe graphics”, which I used. And (partial) “bingo”: I finally got a boot, but still the same disturbing BIOS errors.
The System then booted in a “safe mode” with 1024x768 resolution.
I found where I could (theoretically) change this, but as it is “safe mode”–…
@amunizp @Linux4Everyone @linux
@vipaal
(2/3)
…-no changes possible.
I then Powered Off the system and it hung in several error lines. - Too risky for me and the 1024x768 is unusable nowadays.
So, final verdict: OMEN is incompatible with UBUNTU, at least.
Also, I tried to use the Boot Stick on my old ASUS. I did add the USBdrive as 1st boot priority. However, the Laptop does not recognize any bootable OS at all.
I therefore giv
@amunizp @Linux4Everyone @linux
@vipaal @amunizp @Linux4Everyone @linux
(3/3)
…e up on UBUNTU and use the flash drive to generate a windows bootstick. Too bad.
But thanks again.
@HistoPol
Unfortunate to see hurdles thrown in the way to install a Linux based OS by manufacturers, though not quite surprising.
If the desire to try remains in you, please reach out to the local Linux users group #lug and ask if one of the members could spare a couple of hours with you. Many old timers would be glad to help. Might even bring back their memories of install fests.
https://www.infofuge.com/hp-omen-17-ubuntu/ there is hope to succeed in installing #ubuntu. Since as you said earlier that this is your first time outside of Windows there may be some loss in translation.
@amunizp @Linux4Everyone @linux
@vipaal
(1/2)
Thank you very much for your help and your kind words in particular.
I might try again later on, but for now, I need to get my PC moving again.
Strange that it did not work out with the old ASUS laptop either.
I will bookmark this post to be able to get back to it.
Funny enough, creating the Win10 bootstick was a piece of cake (as well) and the installation went smoothly (apart from the “1 m.” updates and restarts).
Strange, with the…
@amunizp @Linux4Everyone @linux
@vipaal @amunizp @Linux4Everyone @linux
I refrain from asking why.
I am thankful for the solution path. Will try it tomorrow.