Ok, I forgot the voltage drop =\ I got LED light so should be fine. What I should do is put your circuit to the test without the capacitor and check if the voltage is low enough for the capacitor to handle ? How should I balance the capacitors ? (Even if I will not take this path, I would like to know)
Thanks again for your help
What I wanted to do was something like that
Though you seem to have a better knowledge and better circuit. I bought 2 super cap 5.5v so I wanted to put them in series (though get half the capacitance). Your approach seems to be better and I may take it. Though mine should be working ? Keep in mind that I’m a nooby in electronics and I keep learning from the internet so not the best to have solid base…
Does your solution works with 5.5V, the 6V dynamo does not blow it ?
Thank you for your answer I really like it.
Seems bad so, I have to make a diode bridge rectifier so =\ need to scrap more diode ! Too bad as I wanted to make something small
Really good point, though as a stupid human I didn’t understood what was the difference between the Nxt 60 steady and the Nxt 60 E bike… Now I know. I don’t have this marvelous option =\ explaining why the back doesn’t light up either… Thank you for pointing it out, I couldn’t get the article from the site itself so I took another seller and it was not available (it is now)
Indeed, 2 pair of 2 wires so 4 wires can be connected to the dynamo.
I will try that, I need to find some proper diode then find the capacitor or buy it and I should be good. I’ll keep you in touch if I manage to find the parts. Thank you
Yes but it should not be like 30 seconde long I think, so it should be OK for a bicycle :)
I should have put the stuff I have, so here you are : Dynamo : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/93903195SC/axa-hr-traction-right Rear light : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/93929195SC/axa-juno-e-bike-6-12v-80-mm Front light : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/92520095SB/axa-nxt-60-steady
Indeed it seems like a great project I think the output is DC though I’m not sure. To be honest I tried to put a capacitor (50V) put it seemed to had no effect (maybe to little capacitance or more probably the coil of the motor should have eaten the storage. Is probably should add a diode to the circuit, am I right ?
In linux mint if I remember correctly, I was able to change the brightness of my monitor but without it built I compatibility. Does someone know if I can do the same in KDE ?
L’idée est bien, mais impossible de voir les prix sans créé de compte. Dommage
You were rights… Bad exe files, even now I’m not sure I believe it. Thank you :) !
OK I will try when I get time, I didn’t download it from fitgirl though. I’ll keep you in touch if I can get it working ! Thanks for your help :)
I’m pretty sure I ran the good exe file, the game is Still Wakes the Deep I’m not sure why it happened but the issue happened with kubuntu also I did found the vcrun and this issue disappeared, though for DirectX I don’t know which DLL choose.
Thank you to start the thing :) I appreciate it and I’m sure I’m not alone <3
Thank you for your answers, I swapped back to kubuntu and will see if I can get it working. Thank you for your time and sorry for the bother.
How does it works ? Do you have a plugins to mark which pixels we should mark ?
He may not, maybe he’s talking about the sound when the car isn’t fast enough to alert people on the street, just to let know that something is coming. It shut at a certain speed I think
I’m sorry I can’t check now but I saw earlier that red means spelling issue and blue means grammar issue. If I find the post I will reply to this post :) Edit : there you go : https://reddthat.com/comment/9809409
I’m not sure I understand what you mean… What switch color ?
You should use the Fdroid version if you are not confident about what you are doing (in my honest opinion)
To add some dictionaries go to the website then download one dictionary : 
Then click on the + button to add the dictionary you download :
Then select the one you downloaded and you should be good :)
Have a nice day !
Remindme! 4 days