• Sestren@lemmy.world
    link
    fedilink
    arrow-up
    144
    arrow-down
    1
    ·
    27 days ago

    Assuming that’s about 5x5’, and going by the price of the first tungsten cube found on Google, this would be worth about 15 million dollars. Decent prize of you could move 150,000lb.

  • Sabata@ani.social
    link
    fedilink
    arrow-up
    55
    ·
    27 days ago

    2/10 Prize 8/10 Prize if delivery is included

    I can put it in the front yard, spray paint it gold, and start a neighborhood cult around The Cube.

    • Wogi@lemmy.world
      link
      fedilink
      arrow-up
      17
      ·
      27 days ago

      You ain’t putting it anywhere. It’s getting delivered and staying where they put it.

      A single 5 foot cube of tungsten would weigh about as much as an above average sized single family home.

        • Jiggle_Physics@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          27 days ago

          I mean, I can only estimate it’s size from the person standing next to it. From there I can use that estimate to get the volume of the cube, then the weight, then look up the cost by weight right now and apply the average.

          So it would be somewhere around 1mm by weight.

      • Sabata@ani.social
        link
        fedilink
        arrow-up
        2
        ·
        27 days ago

        I’m betting I got it a few months before someone can gather the equipment to steal it. It would have outlived its novelty and likely be a burden at that point. If the cult works out The Cube should be self sufficient and could even become a profitable local attraction.

        • chaogomu@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          27 days ago

          A tungsten cube that size would weigh a fuckload.

          To just deliver it would be an undertaking. There will be roads between you and the where ever this came from that are not rated for that weight.

          You may need a specialized truck just to move it, and a crane to get it on and off said truck…

  • stupidcasey@lemmy.world
    link
    fedilink
    arrow-up
    33
    arrow-down
    1
    ·
    edit-2
    27 days ago

    This could possibly be the worst possible prize. Raw tungsten isn’t actually that expensive. What’s expensive is working with it as it melts 3,410c (6,170f) isn’t very malleable and is heavy like really really heavy to move this block you will probably need larger equipment than standard industrial moving equipment, bigger trucks and loaders also you’ll need to get the city’s permission to haul it on the roads , that alone is probably going to cost more than the cube is worth you will then have to pay a monthly storage fee until someone wants to buy it. Shouldn’t be that long right? It’s a valuable metal… well good luck finding a company that works with tungsten outside of china, and you absolutely can not ship it. But let’s assume you find someone who wants it(at a considerable discount) well now you have to higher the specialized movers again.

    EDIT:

    Actually I just did the math and plugged in all the known values I could find and assuming you could sell it within the first year you could probably make $700,000, so it would still be well worth it. But a lot of trouble.

      • stupidcasey@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        27 days ago

        Then good news you can buy it! But you’ll have to commission it’s very specialized construction, and pay to have it shipped across seas… you know that thing I said you absolutely could not do, well with money all things are possible.

    • Captain Aggravated@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      10
      ·
      edit-2
      27 days ago

      I wonder if there’s a foundry in the world with a crucible that can hold, melt, and pour that much tungsten? To make a 5 foot solid cube.

      Then imagine trying to machine the damn thing square.

    • smokebuddy [he/him]@lemmy.today
      link
      fedilink
      arrow-up
      7
      ·
      27 days ago

      Don’t forget having to pay income tax on the original retail value of the cube (assuming this is USA where lottery and prizes are taxable gains)

    • jimbolauski@lemm.ee
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      27 days ago

      Rocket nozzles are commonly made of tungsten, there are more than a few manufacturers in the US. Drill bits can be made of tungsten carbide. Armor piercing weapons use tungsten too. All of these have industries in the US.

      • Wogi@lemmy.world
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        27 days ago

        Drill bits are coated in tungsten carbide. Sometimes. There are a variety of coatings.

        The drill bits you’re buying at the big box store are high speed still with some kind of coating to help them last a little longer. The specialty drill bits you’re buying for working on metal are also HSS with a different coating and probably different tip geometry.

        End mills are milling/lathe inserts can be HSS or carbide, also with some tungsten coating. Importantly, these are sintered, and made out of dust.

        Tungsten carbide is waaaay too brittle to work as a drill bit.

        • jimbolauski@lemm.ee
          link
          fedilink
          arrow-up
          7
          arrow-down
          1
          ·
          27 days ago

          The company I worked for made tungsten nozzles, they had to be welded using atomic hydrogen welding. One day a bottle of hydrogen shows up and receiving rejected it, we had the supplier label it protium and it went right through.

  • merari42@lemmy.world
    link
    fedilink
    arrow-up
    20
    ·
    27 days ago

    NCD would probably be delighted to have something that can be turned into multiple rods from god

  • Zwiebel@feddit.org
    link
    fedilink
    English
    arrow-up
    20
    ·
    edit-2
    27 days ago

    Assuming that’s a meter cubed it weighs 19 tons, or 65 tons for 1.5m³

  • andrew_bidlaw@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    18
    ·
    27 days ago

    It’s being teleported to your location as we speak. I hope you don’t mind it would redesign a couple of floors below you.

  • manualoverride@lemmy.world
    link
    fedilink
    arrow-up
    16
    ·
    27 days ago

    I really wanted to use Tungsten as the base ballast for a custom narrowboat, for better headroom. Other than the cost you also have the problem of tungsten’s melting point being so high you can’t pour it into a boat hull without melting through.

    • finitebanjo@lemmy.world
      link
      fedilink
      arrow-up
      15
      ·
      27 days ago

      You also can’t melt it in general outside of some high tech magnetic field induction chambers, as doing so would melt the furnace in most cases.

      Almost all industrial applications of tungsten involve electrochemistry or otherwise the mixing of fine tungsten dust.

    • Jon_Servo@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      27 days ago

      Aircraft use tungsten ballast plates. I know it requires hardware, but would that have been viable?

      • manualoverride@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        27 days ago

        Possible but the expense ruined my plans in the end… I did consider collecting broken tungsten end mills and inserts from machine shops and throwing them in molten lead, like croutons in a lead soup.

        • Captain Aggravated@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          2
          ·
          27 days ago

          If I understand it right, you’d get mostly cobalt that way. Carbide tooling isn’t solid tungsten or silicon carbide but carbide powder embedded in cobalt.

  • LouNeko@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    edit-2
    26 days ago

    God, I want to drop this thing from orbit on a populated city so much.

    Edit: Just as a prank tho.

    • skibidi@lemmy.world
      link
      fedilink
      arrow-up
      5
      arrow-down
      1
      ·
      26 days ago

      Dropping anything in orbit just means it is still in orbit.

      You’d need a lot of fuel to deorbit that cube on a steep trajectory.

      • vinyl@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        26 days ago

        Wouldn’t it be easy to account for the forwards momentum and just lead on the shot?

        • skibidi@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          24 days ago

          The issue isn’t forwards, it is down.

          You have a tungsten rod held in a clamp on a satellite in a nominally stable orbit. Releasing the clamp just means the tungsten rod is now in essentially the same nominally stable orbit as the satellite.

          To deorbit it, you need to meaningfully change its velocity. As tungsten is very dense, that takes a lot of fuel. The more fuel that is used, the sooner the rod will hit the ground and the higher the angle.

          Simply dropping it means you have to wait months or years for the orbit to naturally decay, a lot of energy will be lost to atmospheric friction, and there is little control over the impact point. Not exactly what you want in your WMD.

  • dan@upvote.au
    link
    fedilink
    arrow-up
    10
    ·
    27 days ago

    I like how there’s so many comments about the value of the cube, and no two comments have the same value.

  • RememberTheApollo_@lemmy.world
    link
    fedilink
    arrow-up
    11
    arrow-down
    1
    ·
    edit-2
    27 days ago

    Let’s say that cube is 4.5’ a side. That’s 91.125 cu ft. Tungsten weighs 1,201.738 lb/cu ft. Which means the cube weighs 109,508.38 lb.

    That’s an impressively sturdy floor.

    Currently, tungsten is selling at about $340 USD/ton.

    The block weighs 54.7542 tons.

    So this is indeed a decent prize at $18,616 USD.

    All you have to do to claim your prize is get it home.

    Edit: corrected to a less whelming but still difficult to transport prize thanks to chiliedogg.

    • BigDanishGuy@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      26 days ago

      My immediate response was to do the same calc. But using SI units, because I don’t live in Myanmar or the USA.

      I figure that it’s a cube, and judging by the size of the lucky winner, I would guess that the sides are 1.5m. 3.375m^3 at 19.254 g/cm^3 is roughly 65 tons. According to https://www.metal.com/Tungsten/202212260004 tungsten bars are trading for 49USD/kg. IDK where you got 340 USD/ton, but we seem to differ.

      65 tons at 49 USD/kg is 3’185’000 USD.

      I’d say that a solid homogeneous of tungsten should probably fetch a fair bit more than my price. Casting a cube like that is not going to be easy. Tungsten is rather reactive in the molten form, and has to be kept from air. Just alone keeping 65 tons of molten tungsten under a protective layer of inergen gas is going to be challenging.

      • RememberTheApollo_@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        26 days ago

        No idea why the difference in price. I checked again and it still shows $340/ton on a UK site, another shows $335/ton, some higher for powders or carbide, some way lower for scrap.